Skip to content
Dinamik Üç Eksenli Test Sistemi (Tam Otomatik) Yazdır E-posta
 logo2   Malzeme Test Sistemleri
                     
Eksenel Üçekseni Test Sitemi (Dinamik Üçeksenli Test)
cyclic
Axial Cyclic Triaxial( Dynamic Triaxial Test)
Standartlar:  TS 1900-2, ASTM D 4767, AASHTO T-297, ASTM D 1883, ASTM D- 2435, AASHTO T-216, ASTM D-4546 ve CEO EM 1110, BS 1377:1990 Standards:  TS 1900-2, ASTM D 4767, AASHTO T-297, ASTM D 1883, ASTM D- 2435, AASHTO T-216, ASTM D-4546 ve CEO EM 1110, , BS 1377:1990
Sistem Otomatik olarak çevrimsel yüklemeli üç eksenli test yapar. "Dinamik üçeksenli test" Sytem automated test unit
completely automates cyclic triaxial
testing "Dynamic Triaxial Test"
Yazılım, otomatik tersbasınç doyurumu, Eşyönlü konsolide, Tersyönlü, 32 aşamalı, çevrimsel yüklemeli 10 Hz çalışmalı, yazama ve raporlamayı içerir. Control software addition to automatically backpressure saturate, consolidate isotropically, anisotropically, or Ko up to 32 steps, and run cylic loading up to 10 Hz Includes Editing/Reporting option
Yük Çerçevesi Kapasitesi : 50 kN
Stroke : 0.0013 - 76 mm
Kontrol : Yük - Deformasyon
Kontrol : 0.00003 - 15 mm/dakika arasında ayarlanabilir.		 Load frame capacity : 50 kN
Strok : 0.0013 - 76 mm,
Control : Load and deformation
Speed : 0.00003 - 15 mm/minute adjustable
Sistem, tam otomatik olarak tüm cihazları ve aparatları bilgisayar üzerinden kontrol edebilir.   System can perform automatik control all of the devices on computer.
Sistem, bir yük çerçevesi, bilgisayar kontrol ve veri toplama ünitesi, gerekli sensörler ve ilgili çeviricilerden oluşur. cyclicr System consist of Load frame, Computer Control and Data Collection Unit, Requisite sensors  and Related converters.
Sistem, Boşluk Suyu Basıncı, Hücre Basıncı, Ters basınç ve Hacim Değişimini 250cc hacim  kapasiteli, 0.000006 ile 3 cc aralığında ayarlanabilen ve 1,700 kPa basınç üreten iki adet Bilgisayar Kontrollü Otomatik Akış Pompası ile ölçer System, Pore water pressure, Cell Pressure, Back Pressure and Volume change can be measered by 250cc volume capacity, 0.000006 - 3cc adjustable and 1700 kPa pressure generator two pcs computer controlled automatic flow pump.
Test bilgisayar veya Test çerçevesi ve akış pompaları üzerinden tuş takımı kullanılarak tam otomatik olarak yapılabilir. Full automatic test can performed by computer or on test frame and flow pump with keyboard.
Yazılım üzerinden tüm sensor okumaları gerçek zamanlı olarak okunabilmelidir All of the sensor readings can be read on realtime
Test sırasında okumaların birimi değiştirilebilir ve veriler yeni birimde görünür. While the test, Reading's unit can be changed and data is being showen as new unit.
Kullanıcı dostu Türkçe proğram User friendly windows Turkish software
Sistem konfigurasyonu : System Configuration is following
AXIAL CYCLIC TRIAXIAL ( Dynamic Triaxial Test)
Ürün Kod No Açıklama Product No
CYCLIC Automated Triaxial Cyclic Module CYCLIC
Control software addition to automatically backpressure
saturate, consolidate isotropically, anisotropically, or
Ko up to 32 steps, and run cylic loading up to 10 Hz
Includes Editing/Reporting option
LVDT-1000
LVDT-1000 1in (25.4 mm) External Spring Loaded SS LVDT
LC-00225
LC-00225 2.25 kN (500 lbf)  external load cell
STVI-200
STVI-200 200 psi  Stainless steel pressure transducer
For external  sample and cell pressures measurements 
during cyclic phase of  cyclic triaxial test
CYC-HRD
CYC-HRD Cyclic  Hardware: Coupling, threaded caps
HYD-1000
HYD-1000 Hydraulic Loading Hardware
Includes: 1.1
1.1 Electro-Hydraulic Actuator 1.1.1
1.1.1 MOOG servo-valve 1.1.2
1.1.2 1 gpm  1.1.3
1.1.3 Improved response (180 Hz) 1
1 Hydraulic pump 1.2.1.
1.2.1. 2.5 GPM/  27 Mpa (3000 psi) air cooled hydraulic pump 1.2.2
1.2.2 Adjustable flow and pressure piston pump 1.2.3
1.2.3 115VA or 220 VA  accumulator unloading valve 1.2.4
1.2.4 27 Mpa (3000 psi) accumulator 1.2.5
1.2.5 80 L (20 gallons)  reservoir 1.2.6
1.2.6 5 Hp/230 or 460V/60Hz/3Ph electric motor 1.2.7
1.2.7 Starter and switch box wired to 5Hp motor 1.2.8
1.2.8 (2) 3/8” 3000psi hoses -  10’ long
Fully  Automated Triaxial Shear ( UU, CU, CD) and Stress Path
  LTII-5,000 LoadTrac II - 22 kN (5,000lbf ) cap. Load Frame             LTII-5,000  
Stand alone or computer controlled load frame includes:
LC-1000 Sensors: 4.5 kN (1000 lbf)  external load cell LC-1000
DISP-30 75 mm (3.0 in.) max range displacement transducer DISP-30
Embedded controller
Four analog channels with signal conditionning and power supplies built-in
Built-in  22 bit Data Acquisition and Control
Front panel LCD and Keypad for manual controls
Connector pins for load cell and platen (mounting hardware)
Variable Speed range= 0.00003 mm/min. to 15 mm/min.
Accomodates triaxial cell  up to a max. dia. of 150 mm ( 12 in.
Platen travel = 75 mm ( 3.00 in.)
Micro-switch mechanism to prevent ram over travel
          Built-in software safety shut-off when sensors max out                  
FTII-250-200 FlowTracII Flow Pump FTII-250-200
Includes:
Stainless Steel Pressure sensor  1,400kPa (200 psi) cap.
Highly accurate automatic  volume measurements based on micro-step times
piston cross section area.
Full automation for controls  of volume and pressure up to 1700 kPa ( 200 psi)  
within +/- 0.25 % of indicated pressure
Max. pump capacity 250 cc
Accomodates use of de-aired water
Stepless pressure increments
Stand alone or computer control unit
Micro-switch mechanism to prevent pump piston over travel ( full and empty limit switches)
Built-in software safety shut-off when pressure sensor max out
Embedded controller
Built-in 22 bit Data Acquisition and Control
          Front panel LCD and Keypad for manual controls, and digital display of pressure and unit status
GEO-Net Network/Communication card  GEO-Net
          To be installed inside a Windows-XP/2000 PC                      
Windows XP/2000 Software Modules
TRIAXIAL Automated Triaxial and Stress Path Module TRIAXIAL
Control and Reporting software/hardware addition to automatically
back-pressure saturate, consolidate isotropically
or Ko up to 32 steps, and shear at constant rate 
of strain or stress along any stress path.
This module allows user to run CU, CD, and Stress Path Tests.
          and edit/report one test                                  
3400 Triaxial Cell accepts  35/50/70 mm diameter samples 3400
Includes acrylic chamber ( max. pressure 1000 Kpa)
33028 70mm (2.8") DIAM SAMPLE CAP, PEDESTAL 33028
34020 50mm (2.0") DIAM SAMPLE CAP, PEDESTAL 34020
34014 35 mm (1.4") DIAM SAMPLE CAP, PEDESTAL 34014
301412 LATEX MEMB 35 mm DIA X 0.3mm THICK 301412
302012 LATEX MEMB 50mm DIA X 0.3mm THICK 302012
302812 LATEX MEMB 70mm DIA X 0.3mm THICK 302812
3821 2 PART VACUUM SPLIT MOLD - 35 mm DIAM. 3821
3824 2 PART VACUUM SPLIT MOLD - 50mm DIAM. 3824
3827 2 PART VACUUM SPLIT MOLD - 70mm DIAM. 3827
3832 MEMBRANE STRETCHER - 38 mm DIAM. 3832
3834 MEMBRANE STRETCHER - 50mm DIAM. 3834
3837S MEMBRANE STRETCHER - 70mm DIAM. 3837S
30141 10 EA - O’RINGS FOR MEMBRANE SEALING CLAMP - 35mm DIA 30141
30201 10 EA - O’RINGS FOR MEMBRANE SEALING CLAMP - 50mm DIA 30201
30401 10 EA - O’RINGS FOR MEMBRANE SEALING CLAMP - 70mm DIA 30401
501514 POROUS STONE 38 mm DIA X 6.35 mm THICK 501514
502014 POROUS STONE - 50mm DIA X 6.35 mm THICK 502014
  502814 POROUS STONE - 70mm DIA X 6.35 mm THICK             502814  
3500 Triaxial Cell 70/100 mm 3500
Includes acrylic chamber ( max. pressure 1000 Kpa)
  accepts  70mm, and 100 mm diameter samples            
33028 70mm (2.8") DIAM SAMPLE CAP, PEDESTAL 33028
34040 100 mm (4.0") DIAM SAMPLE CAP, PEDESTAL 34040
302812 LATEX MEMB 70mm DIA X 0.3mm THICK 302812
304012 LATEX MEMB 100mm DIA X 0.3mm THICK 304012
3827 2 PART VACUUM SPLIT MOLD - 70mm DIAM. 3827
3828 2 PART VACUUM SPLIT MOLD - 100mm DIAM. 3828
3837S MEMBRANE STRETCHER - 70mm DIAM. 3837S
3838L MEMBRANE STRETCHER - 100mm DIAM. 3838L
30281 10 EA - O’RINGS FOR MEMBRANE SEALING CLAMP - 70mm DIA 30281
  30401 10 EA - O’RINGS FOR MEMBRANE SEALING CLAMP - 100mm DIA     30401  
 
[ Geri ]