Tek Kafa Döner Aşınma Test Cihazı - Model TABER


Bu profesyonel Tek Kafa Döner Aşınma Test Cihazı aşağıdakiler dahil uluslararası test standartlarına uygun olarak tasarlanmış ve geliştirilmiştir:

•     ASTM C501 (Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser)

•     ASTM C1353 (Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser)

•     ASTM D1044 (Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion)

•     ASTM D3884 (Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method))

•     ASTM D3389 (Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader))

•     ASTM D4050 (Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser)

•     ASTM D5034 (Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test))

•     ASTM D5035 (Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method))

•     ASTM D7255 (Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method))

•     ASTM D6037 (Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings)

•     ASTM D-7255 (Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method))

•     ASTM F362 (Standard Test Method for Determining the Erasability of Inked Ribbons)

•     ASTM F510 (Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method)

•     ASTM F1478 (Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method))

•     ASTM F1978 (Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser)

•     DIN 52347 (Testing Of Glass And Plastics; Abrasion Test’ Method Using Abrasion Wheels And Measurement Of Scattered Light)

•     DIN 53109 (Testing Of Paper And Board - Determination Of Abrasion By The Abrasion Wheel Method)

•     DIN 53754 (Testing Of Plastics; Determination Of Abrasion, Abrasive Disk Method)

•     DIN 53799 (Decorative Laminated Sheets On Basis Of Aminoplastic Resins: Test Method)

•     DIN 68861 -2 (Furniture Surfaces - Part 2: Behavior At Abrasion)

•     ISO 10074 (Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys)

•     ISO 14656 (Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete)

•     ISO 24338 (Laminate floor coverings — Determination of abrasion resistance)

•     ISO 3537 (Road vehicles — Safety glazing materials — Mechanical tests)

•     ISO 4586-2 (High-pressure decorative laminates (HPL HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties)

•     ISO 5470-1 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader

•     ISO 7784-1 (Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen)

•     ISO 7784-2 (Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen)

•     ISO 9352 (Plastics — Determination of resistance to wear by abrasive wheels)

•     ANSI INCUS 322-2008 (Information Technology - Card Durability Test Methods)

•     AS/NZS 1580.403.2:1994 (Paints and related materials - Methods of test--Abrasion resistance - Taber abraser))

•     AS/NZS 4266.2 (Reconstituted wood-based panels - Methods of test - Dimensions, squareness, flatness and edge straightness of whole panel)

•     EN 13329 (Laminate floor coverings. Specifications, requirements and test methods)

•     EN 13523-16 (Coil coated metals. Test methods. Resistance to abrasion)

•     EN 14323 (Wood-based panels. Melamine faced boards for interior uses. Test methods)

•     EN 14327 (Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather)

•     EN 14354 (Wood-based panels. Wood veneer floor covering)

•     EN 14431 (Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture)

•     EN 14688 (Sanitary appliances. Wash basins. Functional requirements and test methods)

•     EN 14864 (Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification)

•     EN 1504-2 (Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete)

•     EN 438-2 (High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties)

•     EN 660-2 (Resilient floor coverings. Determination of wear resistance. Frick-Taber test)

•     DD ENV 13696 (Wood and parquet flooring. Determination of elasticity and resistance to wear)

•     FORD BN108-02 (Ford Laboratory Test Method - Resistance To Abrasion - Taber Abraser)

•     HNEMA LD 3 (High-Pressure Decorative Laminates (HPDL))

•     NF Q 03-055 (Paper And Board Tests - Determination Of Abrasion Resistance Of Paper And Board (by The Taber Method))

•     SAE J 1530 (Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Material)

•     SAE J1847 (Abrasion Resistance Testing-Vehicle Exterior Graphics and Pin Striping)

•     SAE J365 (Method of Testing Resistance to Scuffing of Trim Materials)

•     SAE J948 (Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth)

•     TAPPI T476 (Abrasion loss of paper and paperboard (Taber-type method). Test Method TAPPI/ANSI T 476 om-11)

•     UNE 135203-1:2010 (Road Signalisation Equipment - Horizontal Signalisation - Materials - Laboratory Abrasion Tests - Part 1: Determination Of The Abrasion Resistance By Taber Method)

•     UNE48250 (Paints And Varnishes - Abrasion Resistance - Taber Method)

•     UNE56842 (Kitchen Furniture - Tests For Surfacing Materials)

•     UNE 56843 (Kitchen Furniture - Physical Tests)

•     UNE56868 (Bathroom Furniture - Physical Test Methods)

•     UNE 57095 (Paper And Cardboard - Determination Of Abrasion Strength (Taber Method))

•     ECCAT16

•     GM9515P

•     SIS SS923509


Tek Kafa Döner Aşınma Test Cihazı - Özellikler:

• Çok çeşitli aşındırıcı tekerlekler, bireysel test gereksinimlerinizi en iyi şekilde karşılamak için profesyonel olarak farklı Aşınma Testlerini gerçekleştirir

• İki Farklı Aşınma Hızları: 60 RPM ve 72 RPM

• Farklı ışık koşullarında rahat bir okuma için Aydınlatmalı Geniş LCD Ekran

• Geniş aralıkta  Ağırlıklar ve Test Yükleri

• Yüksek hassasiyet sağlamak için geniş aralıkta Karşı Ağırlıklar

• Test gereksinimlerinizi en iyi şekilde karşılamak için özel olarak üretilmiş Test Yükleri

• 1 Takım Aşındırıcı Tekerlek içerir

• Takviye Diski içerir

• Uluslararası test standartlarına uygun olarak üretilmiştir


Tek Kafa Döner Aşınma Test Cihazı - Mevcut Modeller:

• TABER - Tek Kafa Döner Aşınma Test Cihazı

Döner Aşınma Test Cihazı - Rotary Aşınma Testi Değerlendirmesi:

Döner Aşınma Ağırlık Kaybı Yöntemi: Numune önceden belirlenmiş sayıda dönme döngüsüne tabi tutulur.

Aşınma Testi'nden sonraki farkı tartmak, bilim adamlarının Rotary Aşınma Testi sırasında sürtünme kaybına uğramış numunenin bölümünün belirlemesini kabul eder.

Görsel Son Test Yöntemi: Tamamlanan Rotary Aşınma Test Çevrimlerinin sayısı, numune materyali başarısız oluncaya kadar sayılır.

Aşınma Oluk Metodu: Döner Aşınma Aşınma Oluğu, bir Optik Mikrometre veya bir Profilometre ile ölçülür.

TABER Aşınma Test Cihazı - Döner Aşınma Test Cihazı

  • Ürün Kodu: Taber