$0.00

Load capacity 160 kg on the lever arm, that is approx. 1.8 t on the sample.The lever arm adjustment is achieved by means of a screw pin located on the load bridge.Specifications:Frame and lever arm made of special heat-treated cast aluminumLoad transmission elements made of steel Lever arm pin with roller bearings Articulation of loa..

$0.00

SM010-50        SINGLE PLACE EXTENSION BENCHMade of strong profiled and plated steel, complete with shelf and weight hanger.Extension benches can be added if required. It can be disassembled.Dimensions: mm 1000 x 1000 x 200.Weight: kg 35.SM010-60        TRIPLE PLACE EXTENSION BENCHSteel made, suitab..

$0.00

The cell base and load plunger are made of brass or stainless steel, the sample holder ring and fixing pins too; a Plexiglas cylinder is fitted to contain saturation water.The cell is fitted with a drainage duct and watertight fitting between ring and base so as to allow permeability tests.Each cell is supplied with two porous discs.Avail..

$0.00

These weight sets have been calculated to generate the following forces on the sample: 0.125, 0.25,0.5, 1, 2, 4, 8, 16 and 32 kgf/sq. cm².The sets contain the following quantities of weights: Weights (kg) SM013-KIT SM013-01-KIT SM013-02-KIT 0.125 0 0 0 0.250 0 2 2 0.500 0 1 ..

$0.00

Model Travel  Division   mm mm ADG10 5 0.001 ADG10-10 12 0.002 ADG10-11 10 0.01 ADG10-12 25 0.01 ADG10-13 30 0.01 ADG10-14 50 0.01 ADG10-15 100 0:01..

$0.00

Made of silicon carbide, supplied in sets of 2 pieces Test Sample Sample Cell Porous   Dimension Height   Stones Consolidation Ø50.47 20 mm SM010 SM013 Consolidation Ø63.5 20 mm SM010-01 SM013-01 Consolidation Ø71.4 20 mm SM010-02 ..

$0.00

Made of stainless steel: Test Sample Sample Cell Hollow  Tamper   Dimension Height   Punch   Consolidation Ø50.47 20 mm SM010 SM011 SM012 Consolidation Ø63.5 20 mm SM010-01 SM011-01 SM012-01 Consolidation Ø71.4 20 mm..

$0.00

Standard : ASTM D4829DescriptionSL204 Expansion Index Consolidometer is used to determine the swelling potential of compacted soils through moisture conditioning a soil specimen to 50 percent saturation and compacting the sample into a 4x1 in (102x25mm) stainless steel specimen ring. The confining load is applied and the specimen is immer..

Showing 1 to 8 of 8 (1 Pages)