$0.00

Standard: EN 12730Static Strength DeviceThe device consists of the following parts* Guiding RailUsed to apply a vertical load on the sample. The distance between the load and loading disc on the sample can be adjusted to 40 ± 2 mm* Loading BarThe loading bar and piercing ball weight are calibrated to 2 kg.* Installation discs1 kg of 3 kg and 3 kg o..

$0.00

Standard: EN 12691Impact Resistance Determination DeviceStandards: TS EN 12691The device consists of the following Parts* StandWood + Profile bodyGuide rail, Diameter 25 mmScale Aluminum and Polystyrene separate for support* Drop weight and Drilling UcuDrop weight piston; Diameter: 10 ± 0.1 mm h: 40 mmDrilling Ucu; Diameter 12.7 ± 0.1 mm, 50 HRC* F..

$0.00

Standard: EN 12691, EN 12730The device consists of the following Parts* Vacuum Cell120 mm in diameter; There is a 100 mm diameter glass plate and a transparent tube inside to observe the bubbles on the cell* Digital Vacuum Sensor and IndicatorMeasuring range: 0-101.3 Kpa11-mm wide, two-color LED image2.5 ms high response time± 0.2% reproducibility*..

$0.00

Standard: EN 1928Watertightness DeviceLow pressure watertightness testing device* Metal CellMade of aluminumUpper diameter 150 mm* Manual Pressure Pump* Glass PlatesWater pressure, 5 mm thickness for ≤ 10 kPaWater pressure, 8 mm thickness for ≤ 60 kPa* Digital Pressure Sensor and IndicatorMeasuring range: 0-101.3 Kpa11-mm wide, two-color LED i..

$0.00

Standard: TS EN 1239ADHESIVE TEST DEVICEThis tester is used to test the adhesion of abrasives on bituminous membranes, which are insulating materials.A load of 25 newtons applied over the test sample is applied 55 times to the 4000 mm square area of the 6.6 polyamid brush specified in the stand.The results of the pre-experiment and post-experiment ..

$0.00

Standard : EN 1109This Equipment used the determination of flexibility of bitumen sheets at low temperatures. The test can be carried out on the upper or lower face of the sheet either at a predetermined temperature or successively at different temperature steps to determine the cold bending temperature which represents a limiting temperature. Ther..

Showing 1 to 6 of 6 (1 Pages)