$0.00

STANDARD : Plastic TensileASTM D 638, ASTM D 2990, ASTM D 3826, ASTM D 5083, ASTM D 882,  ASTM D 882, ASTM D 1708 EN 12311, EN 12814, EN 12814, EN ISO 527, EN ISO 527ISO 527-2, ISO 527BS 2782-3, BS 2782-11, BS 2782DIN 53534, DIN 65378, DIN 65466,Plastic FlexuralASTM D 790, ASTM D 6272, ASTM D 790, ASTM D..

$0.00

KT FALCON MATERIAL TEST SOFTWAREThe KT-FALCON Material Test Software offers all kinds of features that you will require performing the standard tension, compression, bending, stripping, tearing, brushing and simple cycle tests in the fastest and most effective manner possible. The software calculates the functions such as performing simultaneo..

$0.00

Testform pendulums are designed to meet the growing demand for accurate and repeatable impact testing on a wide range of materials. Used to determine the mechanical and physical properties of metals, polymers, composites, and finished products for both research and development (R&D) and quality control (QC), the pendulum family is capable of pe..

$0.00

Id-No. level type of test specimen L Low (15 J - 39 J) Charpy V-notch (sets of 5 specimens) 2 mm or 8 mm M Medium (40 J - 99 J) Charpy V-notch (sets of 5 specimens) 2 mm or 8 mm H High (100 J -159 ..

$0.00

APPLICATION  This machine is designed to conduct measurement in accordance with  ISO 1133, ASTM D1238 and ASTM D336  standards.  It  measures  MFR  <Melt  Flow  Rate>  (g/10min.)  and  MVR  <Melt  Volume Flow Rate> (cm3/10min.) of plastics. Melt  ..

$0.00

APPLICATION  With our MFI device; Within the scope of ISO 1133, ASTM D1238 and ASTM D336 standard, melt flow rate (MFR) of thermoplastic material is used to test two processes for determining the mass flow rate and volumetric flow rate (MVR) of a sample drawn from a mold following certain length, diameter, temperature, and pressure conditions...

$0.00

It is used in the hot-cold cycle tests of materials and in the determination of the conditions in moist environment. STANDARD FEATURESCabin volume: 250 Lt.5/2 piece shelvesAISI 304 Stainless interior cabinHeat setting from -10 to + 80 ° C10-40 ° C between 20% and 90%Humidity 0.1 ° c heat sensitivity1% rh moisture sensitivity± 0.5 ° c heat fluctu..

$0.00

The EP 08 Cutting Press is designed for preparation of test specimens foremost of rubber and plastic materials by punching.EP 08 is a small and compact manual press that will fit perfect either in your laboratory, your production or wherever you like to place it. The cutting press stands steady on rubber feet and does not need to be attached to the..

$0.00

The EP 02 Pneumatic Cutting Press is designed for the preparation of test specimens foremost of rubber and plastic materials by punching.EP 02 is a small and compact pneumatic cutting press that will fit perfect either in your laboratory, your production or wherever you like to place it. The cutting press stands steady on rubber feet and does not n..

$0.00

To prepare plastic, rubber, lamine, coating and similar test sampleSample cutting knife 100 mm x 200 mmMotion - Stroke 100 mmPneumatic driveOperation Pressure 6 bar (6800 Newton) One cutter blade will be given..

$0.00

Hydraulic Cutting Press is designed for the preparation of test specimens foremost of rubber and plastic materials by punching.Easy to change diesNo need for height adjustments between different diesSaves time for the operatorMinimize the risk of fault adjustments that might damage the dieIncreases the number of flawless samplesTechnical Speci..

$0.00

Application Features ASPE Sample Preparation Milling Machine is a compact lathe machine for various metals and non-metals. The motion control is based on numerical control Technology, which is programmable for a range of specimens. High performance 3 axis milling CNC controller.The user friendliness of the controller restricts the need for a hi..

$0.00

OVERVIEWTESTFORM laboratory hot plate presses are designed for polymer processing, rubber, and composite works. The usage areas of presses are quality control, product development, and research studies.HPRESS series is recommended for basic pressing operations with 150/250/500 models. HPRESS series presses are high quality and economical devic..

$0.00

Introduction:This machine is designed to notch a plastic specimen for Charpy and Izod impact test. It is suitable for notched specimen preparation in laboratories of research institutes and academy, and nonmetallic material manufacturer. Features:Application: To notch a plastic specimen for Charpy or Izod impact test. Standard: ISO179, I..

$0.00

The next generation IRSpirit is among Shimadzu's portable FTIR solutions. For sites with only a narrow space available, samples can be measured with the unit positioned horizontally or vertically. With the widest sample compartment in its class, it easily accommodates Shimadzu and third-party accessories. IR Pilot includes 23 application prog..

Showing 1 to 15 of 26 (2 Pages)