$0.00

Standard : ASTM D1559, AASHTO T245, EN 12697-10, ASTM D6926Made of zinc-plated steel, consisting of the actual mould body [diameter 4” x 3” (101.6 x 76.2 mm)], base plate and filling collar.Dimensions: diameter 115 x 155 (h) mmWeight: 3.5 kgThe three parts can be supplied individually:BA030-01        &nb..

$0.00

Standard : ASTM D5581-96Made of zinc-plated steel, consisting of the actual mould body diameter 6” (152.4 mm), base plate and filling collar.Weight: 5 kgThe three parts can be supplied individually:BA029-01             MOULD BODYBA029-02       &..

$0.00

Standard  ASTM D6926, AASHTO T245without geared motor, mechanic devices and electric system.This compactor consists of:- wooden pedestal with rammer drive rod- compaction rammer, consisting of centering rod and tamping ram (4,535 kg).- steel base (compaction anvil)- mould clamping system with quick couplings.Dimensions: 400 x 250 x 1500 (h) mm..

$0.00

Standard : ASTM D1559, AASHTO T245, ASTM D6926Wooden pedestal manufactured in compliance with standards with base connections to secure the machine to the fl oor.Tubular steel frame housing the driving mechanism of the compaction rammer. Steel base plate (compaction anvil for hammer); mould clamping system with quick couplings.D..

$0.00

Standard : EN 12697-10, EN 12697-30The machine performs compaction on hot samples of bituminous mix, stopping after the preset number of blows.The anvil in laminate hardwood is connected to the base in concrete which also supports the drive rod.The compaction mould is held in position by a quick-clamping device as prescribed by Standards; a sa..

$0.00

Standard : EN 12697-10, EN 12697-31, AASHTO T312 (TP4), ASTM D6925, SHRP M-002, T 0736-2011I Main technical features1. Using high hardness and high quality steel as a framework, to ensure accurate angle control.2. Electro-pneumatic servo control regulation.3. Color display touch control system, can be directly connected to the computer, t..

$0.00

Standard : EN 12697-33, EN 12697-22The special feature of the machine is the integration of two distinct functions in a single system; the first allows the compaction of slabs of bituminous mixtures to a controlled density, the second is for performing the wheel tracking test.A “kneading” system is used for compaction and consists in positioni..

$0.00

Standard : ASTM D 698 ASTM D 1587 ASTM D 1883 BS 598 BS 1377 BS 1924With hydraulic manual jack (3000 kg capacity).Suitable for the extrusion of 4" and 6" samples from moulds.Annular and slotted plates for quick set-up.It enables the extrusion of Marshall, Proctor, C.B.R. samples.Dimensions: 300 mm dia. x 500 (h) mm. Weight: 30 kg..

Showing 1 to 8 of 8 (1 Pages)