$0.00

BS 812To verify if aggregate is flaky; i.e. if its thickness is less than 0,6 of its nominal size. Constructed of heavy gauge stainless steel sheet..

$0.00

BS 812To determine if aggregate is elongated; i.e. if length is more than 1,8 of nominal size.Mounted on a hardwood base...

$0.00

EN 933-4, DIN 4226, ISO 3310-1-2For measuring the length/thickness ratio of individual particles..

$0.00

ASTMD4791The proportional caliper is a timesaving device used for the rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of 9.5mm or larger.The device consists of a 152.4 x 406.4 mm base plate with two fixed posts and a 330.2 mm pivoting arm mounted between the posts so there is an opening at the end of..

$0.00

This testing apparatus is used to conduct tests that measure the void content of non-compacted fine aggregate. Cylinder bore Pycnometer Ø 39 * 84 mm (100 ml) Height of funnel 38 mm(angle 60°) Outlet Ø 12.7 = 2mm Height of Outlet 115= 2mm Glass 5t x 100 x 100mm..

Showing 1 to 5 of 5 (1 Pages)