$0.00

Standards: TS EN 12390-2, BS 1881:102, AASHTO T112, ASTM C143Complete set including :CN180-01                    Slump cone, galvanized steelCN180-02                 ..

$0.00

Standard : EN 12350-2, EN 12350-8, ASTM C143, BS 1881:102, AASHTO T119, NFP18-305Portable slump cone set, including:Slump Cone, galvanized steelGraduated steel tamping rod, galvanized, dia. 16x600Base, manufactured from heavy duty galvanized steel and measuring bridge which is also used as carrying handle.The slump is measured using the..

$0.00

Standards:   TS EN 12350-5, BS 1881:105, DIN 1048Complete set including :Galvanized steel conical mould dia.130x130 h 200 mmGalvinezed double steel sheet  flow table with top plateTamper 40x40 h:200The top table has a square surface of 700x700 mm Weight : 30 kg..

$0.00

Standard : ASTM C360For determining the consistency of fresh concrete.Cylindrical weight with semi-spherical bottom (14 kg), rod with handle, guide and support stirrup.The rod is graduated in 1/4” (6.4 mm) increments.Dimensions: 360 x 160 x 360 (h) mm. Weight: 16 kg...

$0.00

Standard : NF P18-452 The concrete workability meter is designed to test concrete for dynamic workability. It is suitable for field and laboratory tests to check: - concrete mix for consistency, especially water content - optimum proportioning of concrete constituents (sand, gravel, water, cement) - possible improvement when adding a plastifie..

$0.00

Standard : ASTM C 1362For determining the compaction degree and workability of fresh concrete; the result is directly correlated to the standard slump test.Dimensions: 70 x 70 x 300 (h) mm. Weight: 500 g...

$0.00

Standard : EN 12350-4 DIN 1048For determining the consistency of fresh concrete.In galvanised sheet steel.Inner dimensions: 200 x 200 x 400 (h) mm.Overall dimensions: 310 x 205 x 402 (h) mm.Weight: 7.5 kg...

$0.00

Standard : TS EN 12390-2, BS 1881:104, ASTM C170:91For determining the consistency and workability of concrete.It is suitable for concrete mixes of low or very low workability.The concrete is subjected to vibration after the cone hasbeen removed.The assembly is mounted on a vibrating table (with pre-setintensity and frequency) and a plastic di..

$0.00

Standard : BS 1881This test gives an accurate indication of the workability of concrete. It is particularly suitable for mixes withlimited workability that have aggregates with max. 38 mm diameters.The equipment consists of two conical hoppers with quickopening traps that allow the concrete to fall freely.A specimen mould, mounted on..

$0.00

STANDARD : ASTM C1339-02 (2012)The CN200 is the “Grout Demonstration Box used for determining flow rates. The CN200 is constructed of HDPE with dual flow configurations built in. A clear acrylic cover plate allows easy viewing while monitoring grout flow...

Showing 1 to 10 of 10 (1 Pages)