Computer-controlled Vicat needle apparatus with 6 measuring points, fully automatic
- Product Code: 1.0366
EN 196-3
The six measuring points (2 x 3) are installed in a rectangular trough.
Tests can be performed in air or in a water bath with constant temperature (heat exchanger and cooler for constant water temperature of 20±1°C), with programmed test sequences.
The unit automatically records the initial set time and final setting time, as well as setting plots.
The weight of the plunger and the Vicat needle together is 300 g ± 1 g.
After each penetration, the Vicat needle is automatically cleaned.
The computer-controlled Vicat needle apparatus consists of:
- The base unit as a table model with the control unit and standard software for programmable test sequences and for data recording
- 6 Vicat molds (conical hard plastic ring) 70/80 dia. x 40 mm
- 6 glass base plates, 120 mm dia.
- 6 centerings for Vicat molds (conical hard plastic ring) 70/80 dia. x 40 mm
- 1 pair of cleaning brushes
- 1 tee wrench, 1.25 mm
- 1 tee wrench, 2 mm
- 2 spare glass plates, 120 mm dia.
- 2 spare initial-set needles, 1.13 mm dia.
- Filter sponge coarse
- Filter sponge fine
- Serial cable
- USB/RS232-Adapter
- Mains cable
Dimensions (wxdxh) = 700 x 600 x 600 mm
Weight: 52 kg
110-230 V / 50-60 Hz
Important:
For operation, a standard PC or laptop is needed, which is not included in the scope of delivery.
Product Categories
AGGREGATES (173)
ROCK MECHANICS (31)
ASPHALT/BITUMINOUS MIXTURE (107)
BITUMEN (65)
CONCRETE (157)
CEMENT - MORTAR (95)
- Cement samplers (2)
- Le Chatelier flask (1)
- Soundness of cement and limes (3)
- Determination of shrinkage and expansion (6)
- Autoclave, high pressure (3)
- Blaine air permeability apparatus (3)
- Content of air (3)
- Setting time (5)
- Calorimeter (2)
- Muffle Furnaces (8)
- Building lime test apparatus (7)
- Flow tables (4)
- Drilling fluids testing (6)
- Protection and repair of concrete structures (3)
- Fineness of fly ash by wet sieving (1)
- Preparation the specimens - Mixing (3)
- Preparation the specimens - Moulds (8)
- Preparation the specimens - Vibrating table (2)
- Preparation the specimens - Curing (9)
- Non-Destructive Tests - Strength evaluation apparatus (3)
- Compression and flexural testing machines (6)
- Density Analysis of Powders, Foams and Bulk Solids (3)
- Vane Shear Test (1)
- IBC Mixers & Agitators (5)
CERAMIC (47)
SOIL (138)
SOIL MECHANICS (50)
METALS (32)
PLASTICS (30)
RUBBER (17)
TEXTILE - FABRIC - YARN (26)
CARBOARD - PAPER & PACKING (36)
INSULATOR (24)
FURNITURE (5)
MINING (51)
FOOD (30)
TABLET PRESS (2)
HEALTHCARE (313)
GENERAL EQUIPMENT (617)