Automatic vicat needle apparatus
- Product Code: CM044
Standard : EN
196-3:2005, EN 13279-2 (GYPSUM), EN 480-2, ASTM C187, ASTM C191,
AASHTO T129, AASHTO T131
Automatic Vicat needle
is a 32 bits equipment, of the last generation which enables to perform the
following tests automatically:
Initial and final
setting time in cement, as per EN 196-3:2005 and ASTM C191.
Setting times in
gypsum as per EN 13279-2.
Normal consistency as
per EN 196-3: 2005 and ASTM C187.
Setting times in
additives for concretes, mortars and pastes, as per EN 480-2.
Any other standard or
testing rocedure, by means of standard editor incorporated and easily
programmable by the user himself.
Technical characteristics
Multi-standard. 6
standards configured and pre-recorded and 9 additional standards programmed by
the user according to his specific needs, directly on the equipment menus or
externally from a PC by means of an
application for WINDOWS.
Controlled by a 32
bits microprocessor of the last generation.
High resolution (128 x
64 points) LCD graphic screen in inverted blue.
Frontal membrane
board, with 6-keys sensitive keyboard. It protects display and allows surfing
menus, select and / or configure tests, parameters, start the test, etc.
Control of the exact
position of penetration by stepping motors.
Power supply: 220-240
V 1 ph 50 Hz 40 W
Dimensions: 230 x 290
x 355 mm
Weight: 16 kg
Accessories :
CM050-01 1.13 mm diam needle asa per EN 196-3 and EN 480-2.
CM050-02 1 mm diam. needle as per ASTM C191.
CM050-03 Light alloy sliding weight and stainless steel conical needle (total weight of the mobile set 100 g) for gypsum tests as per EN 13.279-2
CM050-04 Stainless conical needle for gypsum as per EN 13279-3.
CM050-05 Stainless steel slinging weight probe-holder, with a 10 mm diameter x 50 mm length probe (total weight of the mobile set 300 g), for consistency tests as per EN 196-3 and ASTM C-187.
CM050-06 Stainless probe, 10 mm diameter x 50 mm length, for consistency tests as per EN 196-3 and ASTM C-187.
CM050-07 Stainless steel sliding weight needle-holder with 1.13 mm diameter needle and total weight of the mobile set of 1000 g (for setting times tests in additives for concrete, mortar paste, as per EN 480-2).
CM050-08 Stainless steel sliding weight needle-holderwith final setting needle, as per EN 196-3.
CM050-09 Truncoconical mould as per EN 196-3, EN 480-2 and EN 13.279-2.
CM050-10 Trunco-conical mould as per ASTM C191 and C187.
CM050-11 Immersion bath with centring ring for moulds as per EN and ASTM.