Laminar Flow Cabinet, Sterile Cabinet - 1065x900x2250 mm
Product Code: MLF-90/I
MLF Series Class II Microbiological Safety Cabinets
The MLF Series Microbiological Safety Cabinets provide high-level protection for the user, environment, and product. They are designed for all work involving harmful and potentially harmful microorganisms.
MLF Class II Microbiological Safety Cabinets provide first-class protection for the operator, environment, and samples being worked against aerosols that may be hazardous or generated from hazardous microorganisms inside the cabinet.
The outer body of the cabinets is made of electrostatic powder-coated steel sheet. For easy cleaning, the work surface is made of stainless steel to prevent contamination. The laminated tempered front window does not allow UV rays to pass through.
Control Panel Features
The control panel is digital with LCD display. The following parameters are found on the control panel:
- Air flow speed
- Total operating time
- Timer
- HEPA filter life
- Front window
- UV lamp
- Total operating life of UV lamp
- UV lamp countdown timer
- Flow rate of particle-free air to the work area
The device has 2 HEPA type filters that capture particles larger than 0.3 microns. The minimum efficiency level is 99.999%. (According to DOP test) The decontamination factor (F) is minimum 100,000.
Air channels with contamination risk in the device are kept under negative pressure, thus preventing particle mixing with the air going to the work area.
Ease of Use and Advantages
- MLF Class II Microbiological Safety Cabinets are designed with safety, ease of use, user comfort, and ease of maintenance in mind.
- O.P. test output is provided as standard.
- HEPA filters can be easily and quickly replaced. The easily accessible control system is placed outside the contaminated area.
- No effort or time is needed to clean the inside of the glass window. The automatic window opens fully and stays in place to facilitate cleaning.
- Since all operations are automatic, the user does not need to make any adjustments.
- The noise level is very low thanks to the silent fan.
Technical Specifications
| MLF Series Class II Microbiological Safety Cabinets - Technical Specifications | |
| HEPA Filter | HEPA type filter that captures particles larger than 0.3 microns. Minimum efficiency level is 99.999%. (According to D.O.P test) The decontamination factor (F) is minimum 100,000. |
| Work Cabinet | Epoxy electrostatic powder-coated 2mm cold drawn steel DKP, lower cabinet mobile removable or fixed system with metal cover, hose nozzle gas and water outlet nozzles inside the cabinet, heavy and light gas adjustment panel, fluorescent lighting inside the cabinet, UV lighting, hood section with suitable air flow physics |
| Work Surface | Modular perforated AISI 304 stainless steel, acid-resistant compact laminate |
| Pre-filter | Synthetic fiber based filter that filters particles in the air coming to the HEPA filter, extending the life of the HEPA filter. |
| Fan | Standard EN 60034-1 Protection class IP44 Steel body, single suction centrifugal type blower. Impeller and motor are statically balanced. Laminar air velocity is 3.35-0.55 m/s. |
| Lighting | Low power high intensity 800 Lux (Fluorescent Lamp/UV Lamp) |
| Work Dimensions | Optional |
| Paint | Metal parts are cleaned with special solvents, then coated with epoxy electrostatic powder paint and baked at 200°C. |
| Noise Level | 55 dBA |
| Standard Accessories | Foot support stand/UV lamp/Speed adjustable dimmer switch/filter life counter |
| Options | Complete stainless steel inner basin/gas and water valves/sink/cabinet |
| Installed Power | 220 Volt/50Hz |
| Air Flow Control | Manual Speed Controlled |
| Other Technical Features | The device is produced according to user requests and laboratory conditions. |
