Pin On Disk Test Device

Product Code: PODWT

Pin On Disk Test Device
Pin On Disk Test Device Pin On Disk Test Device
Categories:
Abrasion Test Devices

Circular wear and friction is a type of wear found in many mechanisms around the world.

With the TESTFORM PODWT Device, you can test wear values. The device has a circular disk on it. Additionally, there are mounting shoes and connection points on the disk to attach the product you want to perform wear testing on. The device has an abrasive holder and a fixed load application lever for abrading the sample. There is a mechanism that can adjust the wear diameter that will be drawn on the sample.

The rotational movement is started. Then, sensors that detect forces formed axially under fixed load work. With this device, you can perform wear on many materials. The device's operating system complies with international standards.

Technical Specifications

A temperature control unit and portable temperature chamber can be added to this device. The hardware and features listed below are available on this device.

  • The device's dimensions are suitable for use on a table.
  • The device's body and moving parts must have high rigidity, and the disk and table dimensions have a design that allows comfortable working. With this design, sample mounting and sample removal experiments can be easily performed.
  • The device has an integrated temperature chamber. This chamber can be digitally adjusted from room temperature up to a maximum of 750 ±2 degrees Celsius.
  • Fixed and moving parts exposed to heat are made of heat-resistant alloy steel.
  • The device has an electronic control panel. You can control and set test times in seconds, minutes, and hours.
  • The device has a separate power unit for temperature control, which is connected to a module. This module can be adjusted within the specified temperature range and can maintain the temperature at the desired level. The temperature module allows for pin on disk wear experiments at high temperatures for the set duration.
  • Heating rate is 6°C/minute.
  • Disk rotation speed can be adjusted.
  • The device has computer software. This software can show the friction forces obtained during the test on the computer screen.
  • The balance lever is movable.
  • The indicators on the device can detect forces precisely.
  • The drive motor has an AC inverter control.