Beton Press - 5000 kN Capacity
Product Code: CN009
Categories:
Introduction
Our pressure testing device is used to determine the characteristic compressive strength of concrete and to determine compressive strength classes.
Pressure tests are performed on test specimens. Cube-shaped specimens with a maximum edge length of 200 mm or cylinders with a maximum height of 320 mm and a diameter of 150 mm can be placed in our machines.
In this test, the concrete specimen is placed on a hardened pressure plate and loaded manually or automatically until it breaks.
Standards
- EN 12390-4, EN 772-1, BS 1881:115, BS 6073, DIN 51220, NF P18-411, ASTM C39, AASHTO T22, ASTM C140, ASTM C1314
Main Functions and Usage
- Mainly used for testing the compressive strength of concrete.
- Test Rate Control Method: Electro-hydraulic closed-loop control.
- High Stability
- Calibration accuracy: Class 1
- 4-column frame with high rigidity and weight
- Power supply: 230V 1ph 50Hz 750W
| MODELS | CN005 | CN008 | CN009 |
|---|---|---|---|
| Capacity | 2000kN | 3000kN | 5000kN |
| Controller | PCM305 LCD Screen 2 Channel controller | ||
| Loading Control Speed Range | 0.05 kN/s - 20kN/s | ||
| Test Load Measurement Range | 2% ~ 100%FS | ||
| Relative Accuracy of Test Force Value Indicator | ≤±1%/±0.5% | ||
| Upper and Lower Pressure Plate Dimensions (mm) | 370x370 | 400x500 | 500x600 |
| Maximum Gap of Upper and Lower Pressure Plates (mm) | 360 | 360 | 500 |
| Maximum Piston Stroke (mm) | 50 | ||
| Piston Diameter (mm) | Ø330 | ||
| Nominal Pressure of Hydraulic Pump (MPa) | 40 | ||
| Load Frame Dimensions (LxWxH) (mm) | 900x600x1150 | 1050x900x1260 | 950x1450x1650 |
| Weight (kg) | 800 | 1500 | 4000 |
