Hydraulic Steel Tensile Testing Machine - 600 KN

Standards

ASTM E8M, ASTM E21, ASTM A 370, ASTM F519, ASTM B557

BS 18/1, BS 18/2, BS240, BS 1140, BS 1639, BS 2874, BS 3855, BS 4449, BS 4482, BS 4483, BS 4545

ISO 5600 2740, ISO 5600 3325, ISO 5600 3928

EN 10002-1, EN 10002-5, EN 845-3

DIN 50106, DIN 50111, DIN 50145

The device can be manufactured as 600 KN or 1000 KN upon request.

General Features

• Tensile and compression tests can be performed with the device.
• The main body is mounted on four columns and has hydraulic jaws.
• Fully automatic and computer-controlled.
• Comes with special high-strength steel jaw sets and jaw bodies.
• Capable of high-precision laboratory-type measurements.
• Two optional sensor selections are available.
• Allows calibration to two different values digitally.
• Compatible with strain gauge, load cell, transducer, and potentiometric output (pressure, elongation, flow rate, etc.).
• Membrane operator panel.
• Has manual and automatic reset feature.
• Can store maximum (peak) values in memory.
• Can be connected to a computer.
• Supply voltage: 220V AC
• Suitable for manual and automatic use.
• Has valve and inverter control capability.
• Has a microcontroller-based design.
• Capacity: 600kN
• Load measurement accuracy: ±1%
• Elongation measurement accuracy: 0.01 mm (10 microns)
• Vertical test distance min.: 60 mm, max.: 360 mm
• The distance between the two jaws can be adjusted before the test (electric motor).
• Piston travel distance: 300 mm
• Load Cell accuracy: 0.02%
• Can perform tensile tests between Ø 8 - Ø 32 mm.
• Computer material testing program is provided.
• Load-Elongation graphs can be obtained in the program; can provide calculations for Max. load, max. elongation, breaking load, breaking elongation, Young's modulus, yield, etc.
• Can provide test reports consisting of device information, graphics, and test results.
• Jaw Holder Head:
• Hydraulic or pneumatic control option
• Max. moving head travel: 120 mm
• Max. distance between jaw holders: 420 mm
• Distance between compression plates: 320 mm

Load Reading

Precision load cell

Resolution: 0.01

Stability: Class 1 EN 10002/2

Dimensions

Required height: 3000 mm
Frame weight: approximately 2600 kg.
Power: 220 V 1ph 50 Hz