Automatic wick device
Product Code: CM044-T
Application
The Automatic Vicat Apparatus CM044 provides a fully automatic method for determining the initial and final setting times of cements or mortar pastes. Its advanced electronic technologies offer superior performance and complete flexibility. The Automatic Vicat Apparatus CM044 is easy to use and provides accurate test results, making it an ideal assistant for your experiments.
Standards
- Initial and final setting time in cement according to EN 196-3:2005 and ASTM C191.
- Setting times in gypsum plaster according to EN 13279-2.
- Normal consistency according to EN 196-3:2005 and ASTM C187.
- Setting times for admixtures in concretes, mortars and pastes according to EN 480-2.
Features
Automatic Position Calibration
Fully automatic, one-key operation, automatic correct position calibration.
Position Storage
After position calibration is completed, it will be stored in memory, no need to repeat calibration.
Automatic Test Process
One-key operation, automatic penetration measurement and automatic lifting of components after completion.
Smart Test Control
Penetration displacement value is displayed in real-time, no need for frequent visual inspection during testing.
No Needle Change for Initial and Final Setting Test
Initial and final setting test needles are shared to reduce costs and workload.
Smart Evaluation of Results
Automatically evaluate result data according to the requirements of the test specification and initiate the process.
Data Report Storage
Test data is automatically converted and stored in tables; equipped with RS485 communication and USB port.
Technical Parameters
| Parameter | CM044-T |
|---|---|
| Time Control | Time indicator resolution: 0.1 S Time control accuracy: ±0.1S Using high-precision LVDT displacement sensor, split structure, no friction when needle falls. |
| Displacement | Range 0-50mm Displacement display resolution: 0.01mm Relative displacement accuracy: 0.1 mm |
| Data Storage | 200 sets |
| Sliding Assembly | 300g ± 1g (including test rod/test needle), meets the requirements of the standard. |
| Interface | RS485 data output interface USB data transfer interface |
| Accessories | Supporting glass plate Ø10 mm Consistency piston Ø1.13 mm needle and 070/80 mm conical mold compliant with EN (Ø1 mm needle and 060/70 mm conical mold according to ASTM/AASHTO optional) |
| Dimensions | 390mm x 310mm x 575mm (length x width x height) |
| Power Supply | 220±10VAC/50Hz; maximum 40W |
