Çeker Ocak

The best technology, high security, and greater environmental awareness,

Fume hoods, which form the foundation of modern laboratories, are used not only for conducting sensitive tests but also for removing potentially hazardous aerosols that may form. Harmful gases and vapors that occur in the laboratory environment depend on the operating conditions of fume hoods with appropriate suction power and workspace.

Fume hoods are devices equipped with an exhaust system that can remove gases such as acid vapors, heat, and process aromas that occur during operation, and they transfer harmful air in the working environment to the outside through the chimney connected to the system.

• Electro-galvanized steel with epoxy electrostatic paint,
• A window made of tempered glass that can open vertically,
• The cabinet is designed and capable of immediately absorbing and removing pollutants such as acid vapors, heat, and process aromas that may occur during work on the bench,
• Air suction motor with a minimum capacity of 1250 m³/hour,
• Cabinet lighting is provided by a fluorescent lamp. Equipment installed inside the fume hood should be embedded in a way that it is not affected by chemical vapors and does not cause bulges in the cabinet interior space.
• Does not create noise pollution during operation,
• Protected against possible water floods,
• Cabin front window is framed guillotine type,
• Optional water faucet inside the cabinet,
• The suction process is in accordance with air flow physics,

ASPIRATION CABINET

Acid-resistant, made of KOPMAKT or PP (Polypropylene) material. It provides easy use with the optional PP sink, water fitting, and gas fitting. Water and gas fittings are user-friendly as they are controlled from the panel.

MOTOR

The air suction motor is made of acid and acid vapor-resistant PP (Polypropylene) material. The motor power used is 2650 rpm, 1300m³/h, 0.8A, 180W. The motor speed can be adjusted in steps and the on/off switch with speed control unit is located on the front panel of the device.

SPECIAL REQUESTS

1. Production in special dimensions and with different features
2. Panel-controlled gas, flammable gas, and water fittings for use in the aspiration cabinet can be placed according to the user's request.
3. PP sink inside the aspiration cabinet.
4. Front window that can open and close automatically.
5. Material cabinet that can be used with the device