Falling Weight Testing Device
Product Code: DWT-1
Categories:
Standard
EN 1621-1, EN 1621-2
Description
The Drop Weight Test Device is suitable for testing cushioning materials. It has a standard 5 kg falling striker. Normally, the drop height is 100 cm, and as a result of the drop, the striker hits the sample, causing 50 joules of energy to be released.
The device reads the internal energy absorbed by the sample in response to a 50 joule force. It measures the impact absorption capacity of packaging materials and is used to protect personnel and sophisticated items from injury or damage.
Features
| Features | |
|---|---|
| Model | DWT-1 |
| Max. height | 210 cm |
| Test weight | 5 Kg |
| Capacity | 100J |
| Load sensor | 1. Force sensor is higher than 125kN. 2. Minimum sensitivity is 1 kN. 3. Reflection frequency is higher than 8kHz. |
| Features | 1. Impact method A/B is interchangeable. 2. Weight lifting by electric method. 3. Weight is controlled by electromagnet under appropriate safety design. 4. In the closed state, the weight will not open and will create a hazard. 5. Low resistance guide rails are used for weight movement. 6. Software analyzes tests and displays data. |
| Accessories | Software |
| Dimensions | 84x56x275cm |
Related Products
Sample Preparation Device - Plastic, Rubber, Aluminum
MSPE-1
Package Drop Test Device
YT-DL1500-1
Elmendorf Tear Resistance Testing Machine
AT494-1
Climate Control Unit - Capacity: 250 lt
CN314-1
Thermal Shrinkage Testing Device
LTRSY-03-1
Manual Sample Cutting Press
EP 08-1
Notch, Pendulum Impact Tester - Izod and Charpy 50J
SDTC-50J-1